Flexible Connectors
Flexible connectors and repair parts for the drains in kitchens, bathrooms, laundry rooms and mechanical rooms. They line up with pipes that don’t, and none of them need glue.
Find it by room
Pick a room to see the connectors made for it.
Showing all 10 connectors
Coming November 2026AAV KitsVent a sink without opening the wall.1½″ tubularView product ›
Qwik Trap ConnectorA flexible P-trap that lines up when the sink drain and wall pipe don’t.1¼″ or 1½″View product ›
Drain and Trap ConnectorsConnect a tubular trap to drain pipe, or join two pieces of tubular drain.To 1½″ or 2″ pipeView product ›
Dishwasher Drain ConnectorConnect the dishwasher hose to a disposal, a branch tailpiece or an air gap.5/8″ and 7/8″ O.D.View product ›
Shower Drain ConnectorsSeal a 2″ drain pipe into a shower drain body. No lead, oakum or glue.2″ drain pipeView product ›
Fix-A-FlangeRepair a broken toilet flange without cutting it out.Cast iron, plastic, copper or brassView product ›
Hose Grip Washer ConnectorKeeps the washer hose in the standpipe so it can’t pop out and spill water on the floor.1½″ or 2″ standpipeView product ›
Utility ConnectorsConnect a copper or CPVC line to a 1½″ plastic fitting. Press fit, no tools.½″, ¾″ or 1″ lineView product ›
NewCondensate TrapA flexible ¾″ P-trap for HVAC and air conditioner condensate lines. It clamps on with no primer or cement, and you can squeeze it to clear a clog.¾″ pipe or hubView product ›
Hose Bibb Test CapsCap a pipe end for a drain test, then drain it through a garden hose.1½″ to 6″View product ›
Past the trap, back to the drain
When the job runs back to an old cast iron or steel drain line, Proflex shielded couplings make the transition. A stainless steel shield keeps the joint rigid and aligned for above-ground DWV work.
- ¾″ to 8″
- 11 transition types
- Cast iron, plastic, steel, copper and tubular
The seal of a Fernco, the access of a slip nut
Glue seals for good but has to be cut out. Slip nuts come apart but can drip. Fernco clamped connectors do both jobs.
Seals tight,
comes apart
Made of flexible PVC with stainless steel clamps. It flexes to fit the pipe, makes a clamped, leak-proof seal, and loosens with a screwdriver when the drain needs work.
- Good. ServiceLoosen the clamp and slide it off
- Good. MisalignmentFlexes to line up
- Good. SealClamped, leak-proof seal
- Good. InstallScrewdriver or nut driver
Comes apart, but can drip
- Good. ServiceUnscrew the nut
- Fair. MisalignmentVery little
- Fair. SealWasher has to seat square
- Fair. InstallHand-tighten, then check
Seals for good, cut to service
- Poor. ServiceCut it out and redo it
- Poor. MisalignmentNone
- Good. SealPermanent
- Fair. InstallPrimer, cement, cure time
Applies to clamped connectors. Utility Connectors press fit, Shower Drain Connectors drive in, and Fix-A-Flange screws to the floor.
Where to next
Stock it, find it or ask us about it.
Carry Fernco flexible connectors
Traps, drain and trap connectors, dishwasher, shower, laundry and condensate connectors, test caps and repair parts. Small parts that solve common jobs, from a supplier your customers already know.
- Parts for plumbers, contractors and homeowners
- Sell sheets, drawings and install instructions ready to share
- Fernco reps in the field to support your counter and your customers
Buy it
Find Fernco connectors at plumbing supply houses and hardware stores near you.
Where to buy ›Ask us
Not sure which connector fits? Our team can help, or a local rep can.
Contact Fernco › Find a rep ›